The highlights
- Volumio OSinside: TIDAL, Qobuz, Spotify Connect, AirPlay and Roon Ready, with every Premium feature built in
- 2×ESS ES9039Q2M DACs, one for each channel
- 768kHzPCM at 32-bit, plus DSD512
- 90fshigh-precision master clock
- 8+ NOSDAC filters, or none at all
- 8levelsof output to match your amplifier, up to 6.3 Vrms balanced, plus a preamp mode

Designed and assembled in Florence, like every Volumio device.

Made in Florence
Assembled by hand, in Italy
Primo Plus is designed in Florence and assembled there by hand, by the team that also writes its software. Each unit is checked before it leaves the lab.
More about Volumio in FlorenceLook inside
Every part has a job
Primo Plus was designed from scratch around cleaner power, lower noise and a more precise clock. Pick a part to find it on the board.

Sound
Tune it to your system
Eight filters, or none
Pick one of eight digital filters to fine-tune the sound, or switch to NOS mode to turn oversampling off.
Eight output levels
Set the output level to match the input of your amplifier. The built-in volume control works on top of it, so Primo Plus can also run as a preamp, straight into a power amp.
Connections
Plug in everything
Stream over the network, or connect a computer, a TV, a CD drive or a hard disk. Then send the signal out balanced or unbalanced.

In
- Network
- Gigabit Ethernet or dual-band Wi-Fi
- USB-C
- From a computer, up to PCM 768 kHz / 32-bit and DSD512
- S/PDIF coaxial and optical
- RCA and TOSLINK, up to PCM 192 kHz / 24-bit
- USB-A × 2
- Flash drives, hard disks and CD drives
- Bluetooth
- Bluetooth 5.0
Out
- Balanced
- XLR, 1.00 to 6.30 Vrms
- Unbalanced
- RCA, 0.50 to 3.15 Vrms
- USB
- To an external DAC, up to PCM 1536 kHz / 32-bit and DSD1024, with multiroom off
- HDMI
- The Volumio interface on your TV, up to 4K at 60 fps
- Trigger
- 12 V on a 3.5 mm jack, to switch your amplifier on
The Volumio experience
Volumio OS inside. The app in your hand.
Primo Plus runs Volumio OS, the player behind 800,000+ devices. You play it from the Volumio app, free on iPhone and Android.
Volumio OS inside
Premium features built in
All your music, one player
Primo Plus has every Premium feature built in: TIDAL and Qobuz with Connect, Spotify Connect, AirPlay and HighResAudio, plus your music library, your CDs and internet radio.
They belong to this Primo Plus, with no subscription. On a Raspberry Pi or a PC, the same features come with a Volumio Premium subscription.

On your TV
Connect HDMI and browse your music on the big screen, in up to 4K.

In your hand
Use the Remoto remote that comes in the box, or the two knobs and the OLED display on the front.

Primo Plus
Tech specs
Audio specifications
- DAC
- 2 × ESS Sabre ES9039Q2M
- DAC filters
- 8 digital filters for fine tuning
- Supported resolution
- Up to PCM 768 kHz / 32 bit and DSD512
- NOS mode
- Switchable ON/OFF
- Master clock
- High-precision clock with ultra-low phase noise (90 fs) and jitter
- Preamp mode
- Hardware, volume set from the knob, the app or Remoto, to drive power amps directly
- Power supply
- LC filtering and dual linear stage with dedicated line regulators for analog and digital paths
- Network input
- Up to PCM 384 kHz / 32 bit
- USB-C input (device)
- Up to PCM 768 kHz / 32 bit and DSD512
- USB-A input (host)
- USB Flash Drive and HDD/SSD
- USB output
- Up to PCM 1536 kHz / 32 bit and DSD1024, with multiroom off
- S/PDIF coaxial input
- Up to PCM 192 kHz / 24 bit
- S/PDIF optical input
- Up to PCM 192 kHz / 24 bit
- Analog unbalanced output
- 0.50, 0.775, 1.00, 1.50, 2.00, 2.50, 3.00, 3.15 (Vrms)
- Analog balanced output
- 1.00, 1.55, 2.00, 3.00, 4.00, 5.00, 6.00, 6.30 (Vrms)
- Analog output impedance
- ≈140 Ω
- Supported formats
- DSD, WAV, FLAC, ALAC, AAC, Vorbis, MP3 and others
- Supported services
- AirPlay via Shairport Sync, Spotify Connect, TIDAL and TIDAL Connect, Qobuz and Qobuz Connect, Roon
- UPnP/DLNA
- Renderer with OpenHome support
- Plugins
- YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, Fusion DSP, SoundCloud, Mixcloud
Hardware specifications
- USB
- 1 × USB-C device, 2 × USB-A host (5 V / 0.56 A; 5 V / 1.33 A)
- S/PDIF coaxial input
- 1 × RCA
- S/PDIF optical input
- 1 × TOSLINK
- Analog balanced output
- 1 × XLR (stereo)
- Analog unbalanced output
- 1 × RCA (stereo)
- Video output
- Volumio OS app mirroring over HDMI up to 4K / 60 fps
- LAN
- Gigabit 10/100/1000 Mbps
- Wi-Fi
- Wi-Fi 802.11a/b/g/n/ac, 2.4 GHz and 5 GHz
- Bluetooth
- 5.0
- CPU
- ARM Cortex-A72, Quad Core 1.5 GHz
- RAM
- 2 GB DDR4
- Internal storage
- 16 GB eMMC
- Trigger out
- 1 × 3.5 mm jack (12 V, positive on tip)
- Knobs
- 2 rotary encoder knobs with push-button
- Display
- 1.3-inch OLED display, adjustable brightness
- Remote
- Remoto IR remote control (included)
- Power
- 5 V DC / 3 A
- Power input
- Barrel jack 5.5 × 2.1 mm (positive polarity)
- Dimensions
- 27 × 15 × 5.2 cm (10.6 × 5.9 × 2.0 in)
- Weight
- 1.26 kg (2.78 lb)
- Box dimensions
- 31.5 × 19.7 × 11.6 cm (12.4 × 7.8 × 4.6 in)
- Box weight
- 2.04 kg (4.50 lb)

In the box
- Volumio Primo Plus
- Remoto IR remote, battery included
- 5 V / 3 A power supply
- NFC and QR code information card
Owner reviews
What Primo Plus owners say
Reviews from verified buyers on shop.volumio.com, collected by REVIEWS.io. Shown as written, in the reviewer's language.
Die Highlights
- Volumio OSan Bord: TIDAL, Qobuz, Spotify Connect, AirPlay und Roon Ready, mit allen Premium-Funktionen integriert
- 2×ESS ES9039Q2M, ein DAC pro Kanal
- 768kHzPCM mit 32 Bit, dazu DSD512
- 90fshochpräziser Master-Taktgeber
- 8+ NOSDAC-Filter, oder gar keiner
- 8StufenAusgangspegel passend zu Ihrem Verstärker, bis 6,3 Vrms symmetrisch, dazu ein Vorverstärkermodus

Entworfen und montiert in Florenz, wie jedes Volumio-Gerät.

Hergestellt in Florenz
Von Hand montiert, in Italien
Primo Plus wird in Florenz entworfen und dort von Hand montiert, von demselben Team, das auch seine Software schreibt. Jedes Gerät wird geprüft, bevor es das Labor verlässt.
Mehr über Volumio in FlorenzEin Blick ins Innere
Jedes Bauteil hat eine Aufgabe
Primo Plus wurde von Grund auf neu entwickelt, für sauberere Stromversorgung, weniger Rauschen und einen präziseren Taktgeber. Wählen Sie ein Bauteil, um es auf der Platine zu finden.

Klang
Abgestimmt auf Ihre Anlage
Acht Filter oder keiner
Wählen Sie einen von acht Digitalfiltern, um den Klang fein abzustimmen, oder wechseln Sie in den NOS-Modus, um das Oversampling abzuschalten.
Acht Ausgangspegel
Stellen Sie den Ausgangspegel passend zum Eingang Ihres Verstärkers ein. Die integrierte Lautstärkeregelung arbeitet zusätzlich, so kann Primo Plus auch als Vorverstärker laufen, direkt an einem Endverstärker.
Anschlüsse
Schließen Sie alles an
Streamen Sie über das Netzwerk oder schließen Sie einen Computer, einen Fernseher, ein CD-Laufwerk oder eine Festplatte an. Dann geben Sie das Signal symmetrisch oder unsymmetrisch aus.

Eingänge
- Netzwerk
- Gigabit-Ethernet oder Dualband-WLAN
- USB-C
- Von einem Computer, bis zu PCM 768 kHz / 32 Bit und DSD512
- S/PDIF koaxial und optisch
- RCA und TOSLINK, bis zu PCM 192 kHz / 24 Bit
- USB-A × 2
- USB-Sticks, Festplatten und CD-Laufwerke
- Bluetooth
- Bluetooth 5.0
Ausgänge
- Symmetrisch
- XLR, 1,00 bis 6,30 Vrms
- Unsymmetrisch
- RCA, 0,50 bis 3,15 Vrms
- USB
- An einen externen DAC, bis zu PCM 1536 kHz / 32 Bit und DSD1024, bei deaktiviertem Multiroom
- HDMI
- Die Volumio-Oberfläche auf Ihrem Fernseher, bis zu 4K mit 60 fps
- Trigger
- 12 V über 3,5-mm-Klinke, zum Einschalten Ihres Verstärkers
Das Volumio-Erlebnis
Volumio OS an Bord. Die App in der Hand.
Primo Plus läuft mit Volumio OS, dem Player hinter 800.000+ Geräten. Sie bedienen ihn mit der Volumio-App, kostenlos für iPhone und Android.
Volumio OS an Bord
Premium-Funktionen integriert
Ihre ganze Musik, ein Player
In Primo Plus sind alle Premium-Funktionen integriert: TIDAL und Qobuz mit Connect, Spotify Connect, AirPlay und HighResAudio, dazu Ihre Musikbibliothek, Ihre CDs und Internetradio.
Sie gehören zu diesem Primo Plus, ohne Abo. Auf einem Raspberry Pi oder PC gibt es dieselben Funktionen mit einem Volumio Premium-Abo.

Auf Ihrem Fernseher
Schließen Sie HDMI an und durchstöbern Sie Ihre Musik auf dem großen Bildschirm, in bis zu 4K.

In Ihrer Hand
Nutzen Sie die mitgelieferte Fernbedienung Remoto oder die beiden Drehknöpfe und das OLED-Display an der Vorderseite.

Primo Plus
Technische Daten
Audio-Spezifikationen
- DAC
- 2 × ESS Sabre ES9039Q2M
- DAC-Filter
- 8 Digitalfilter zur Feinabstimmung
- Unterstützte Auflösung
- Bis zu PCM 768 kHz / 32 Bit und DSD512
- NOS-Modus
- Ein- und ausschaltbar
- Master-Taktgeber
- Hochpräziser Taktgeber mit extrem geringem Phasenrauschen und Jitter (90 fs)
- Vorverstärkermodus
- Hardware, Lautstärke per Drehknopf, App oder Remoto, um Endverstärker direkt anzusteuern
- Netzteil
- LC-Filterung und doppelte Linearstufe mit eigenen Linearreglern für den analogen und den digitalen Signalweg
- Netzwerkeingang
- Bis zu PCM 384 kHz / 32 Bit
- USB-C-Eingang (Device)
- Bis zu PCM 768 kHz / 32 Bit und DSD512
- USB-A-Eingang (Host)
- USB-Stick und HDD/SSD
- USB-Ausgang
- Bis zu PCM 1536 kHz / 32 Bit und DSD1024, bei deaktiviertem Multiroom
- Koaxialer S/PDIF-Eingang
- Bis zu PCM 192 kHz / 24 Bit
- Optischer S/PDIF-Eingang
- Bis zu PCM 192 kHz / 24 Bit
- Analoger unsymmetrischer Ausgang
- 0,50; 0,775; 1,00; 1,50; 2,00; 2,50; 3,00; 3,15 (Vrms)
- Analoger symmetrischer Ausgang
- 1,00; 1,55; 2,00; 3,00; 4,00; 5,00; 6,00; 6,30 (Vrms)
- Analoge Ausgangsimpedanz
- ≈140 Ω
- Unterstützte Formate
- DSD, WAV, FLAC, ALAC, AAC, Vorbis, MP3 und weitere
- Unterstützte Dienste
- AirPlay über Shairport Sync, Spotify Connect, TIDAL und TIDAL Connect, Qobuz und Qobuz Connect, Roon
- UPnP/DLNA
- Renderer mit OpenHome-Unterstützung
- Plugins
- YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, Fusion DSP, SoundCloud, Mixcloud
Hardware-Spezifikationen
- USB
- 1 × USB-C (Device), 2 × USB-A (Host) (5 V / 0,56 A; 5 V / 1,33 A)
- Koaxialer S/PDIF-Eingang
- 1 × RCA
- Optischer S/PDIF-Eingang
- 1 × TOSLINK
- Analoger symmetrischer Ausgang
- 1 × XLR (Stereo)
- Analoger unsymmetrischer Ausgang
- 1 × RCA (Stereo)
- Videoausgang
- Spiegelung der Volumio-App über HDMI, bis zu 4K / 60 fps
- LAN
- Gigabit 10/100/1000 Mbps
- WLAN
- WLAN 802.11a/b/g/n/ac, 2,4 GHz und 5 GHz
- Bluetooth
- 5.0
- CPU
- ARM Cortex-A72, Quad-Core 1,5 GHz
- RAM
- 2 GB DDR4
- Interner Speicher
- 16 GB eMMC
- Trigger-Ausgang
- 1 × 3,5-mm-Klinke (12 V, Spitze positiv)
- Drehknöpfe
- 2 Drehgeber mit Druckfunktion
- Display
- 1,3-Zoll-OLED-Display, Helligkeit einstellbar
- Fernbedienung
- Remoto IR-Fernbedienung (im Lieferumfang)
- Stromversorgung
- 5 V DC / 3 A
- Stromeingang
- Hohlbuchse 5,5 × 2,1 mm (Pluspol innen)
- Abmessungen
- 27 × 15 × 5,2 cm (10,6 × 5,9 × 2,0 in)
- Gewicht
- 1,26 kg (2,78 lb)
- Verpackungsmaße
- 31,5 × 19,7 × 11,6 cm (12,4 × 7,8 × 4,6 in)
- Versandgewicht
- 2,04 kg (4,50 lb)

Lieferumfang
- Volumio Primo Plus
- Remoto IR-Fernbedienung, inkl. Batterie
- Netzteil 5 V / 3 A
- Infokarte mit NFC und QR-Code
Kundenbewertungen
Was Besitzer von Primo Plus sagen
Bewertungen verifizierter Käufer auf shop.volumio.com, gesammelt von REVIEWS.io. Unverändert wiedergegeben, in der Sprache der Verfasser.
In evidenza
- Volumio OSa bordo: TIDAL, Qobuz, Spotify Connect, AirPlay e Roon Ready, con tutte le funzioni Premium incluse
- 2×DAC ESS ES9039Q2M, uno per canale
- 768kHzPCM a 32-bit, più DSD512
- 90fsmaster clock ad alta precisione
- 8+ NOSfiltri DAC, o nessuno
- 8livellidi uscita da adattare al tuo amplificatore, fino a 6,3 Vrms bilanciati, più una modalità preamplificatore

Progettato e assemblato a Firenze, come ogni dispositivo Volumio.

Realizzato a Firenze
Assemblato a mano, in Italia
Primo Plus è progettato a Firenze e assemblato lì a mano, dallo stesso team che ne scrive il software. Ogni unità viene controllata prima di lasciare il laboratorio.
Scopri di più su Volumio a FirenzeUno sguardo all'interno
Ogni componente ha un compito
Primo Plus è stato progettato da zero attorno a un'alimentazione più pulita, a un rumore più basso e a un clock più preciso. Scegli un componente per trovarlo sulla scheda.

Suono
Adattalo al tuo impianto
Otto filtri, o nessuno
Scegli uno degli otto filtri digitali per affinare il suono, o passa alla modalità NOS per disattivare l'oversampling.
Otto livelli di uscita
Imposta il livello di uscita in base all'ingresso del tuo amplificatore. Il controllo del volume integrato agisce in aggiunta, così Primo Plus può funzionare anche da preamplificatore, collegato direttamente a un finale di potenza.
Connessioni
Collega di tutto
Ascolta in streaming dalla rete, oppure collega un computer, una TV, un lettore CD o un hard disk. Poi manda il segnale in uscita, bilanciato o sbilanciato.

Ingressi
- Rete
- Gigabit Ethernet o Wi-Fi dual band
- USB-C
- Da un computer, fino a PCM 768 kHz / 32-bit e DSD512
- S/PDIF coassiale e ottico
- RCA e TOSLINK, fino a PCM 192 kHz / 24-bit
- USB-A × 2
- Chiavette USB, hard disk e lettori CD
- Bluetooth
- Bluetooth 5.0
Uscite
- Bilanciata
- XLR, da 1,00 a 6,30 Vrms
- Sbilanciata
- RCA, da 0,50 a 3,15 Vrms
- USB
- Verso un DAC esterno, fino a PCM 1536 kHz / 32-bit e DSD1024, con multiroom disattivato
- HDMI
- L'interfaccia Volumio sulla tua TV, fino a 4K a 60 fps
- Trigger
- 12 V su jack da 3,5 mm, per accendere il tuo amplificatore
L'esperienza Volumio
Volumio OS a bordo. L'app nelle tue mani.
Primo Plus usa Volumio OS, il lettore che fa suonare oltre 800.000 dispositivi. Lo controlli dall'app Volumio, gratuita per iPhone e Android.
Volumio OS a bordo
Funzioni Premium incluse
Tutta la tua musica, un solo lettore
Primo Plus include tutte le funzioni Premium: TIDAL e Qobuz con Connect, Spotify Connect, AirPlay e HighResAudio, più la tua libreria musicale, i tuoi CD e la radio via internet.
Restano legate a questo Primo Plus, senza abbonamento. Su un Raspberry Pi o un PC, le stesse funzioni richiedono un abbonamento a Volumio Premium.

Sulla tua TV
Collega l'HDMI e sfoglia la tua musica sul grande schermo, fino a 4K.

Nelle tue mani
Usa il telecomando Remoto incluso nella confezione, oppure le due manopole e il display OLED sul frontale.

Primo Plus
Specifiche
Specifiche audio
- DAC
- 2 × ESS Sabre ES9039Q2M
- Filtri DAC
- 8 filtri digitali per la messa a punto
- Risoluzione supportata
- Fino a PCM 768 kHz / 32 bit e DSD512
- Modalità NOS
- Attivabile e disattivabile
- Master clock
- Clock ad alta precisione con rumore di fase (90 fs) e jitter bassissimi
- Modalità preamplificatore
- Hardware, volume regolato dalla manopola, dall'app o da Remoto, per pilotare direttamente i finali di potenza
- Alimentatore
- Filtraggio LC e stadio lineare doppio con regolatori di linea dedicati per i percorsi analogico e digitale
- Ingresso di rete
- Fino a PCM 384 kHz / 32 bit
- Ingresso USB-C (device)
- Fino a PCM 768 kHz / 32 bit e DSD512
- Ingresso USB-A (host)
- Chiavetta USB e HDD/SSD
- Uscita USB
- Fino a PCM 1536 kHz / 32 bit e DSD1024, con multiroom disattivato
- Ingresso S/PDIF coassiale
- Fino a PCM 192 kHz / 24 bit
- Ingresso S/PDIF ottico
- Fino a PCM 192 kHz / 24 bit
- Uscita analogica sbilanciata
- 0,50; 0,775; 1,00; 1,50; 2,00; 2,50; 3,00; 3,15 (Vrms)
- Uscita analogica bilanciata
- 1,00; 1,55; 2,00; 3,00; 4,00; 5,00; 6,00; 6,30 (Vrms)
- Impedenza di uscita analogica
- ≈140 Ω
- Formati supportati
- DSD, WAV, FLAC, ALAC, AAC, Vorbis, MP3 e altri
- Servizi supportati
- AirPlay via Shairport Sync, Spotify Connect, TIDAL e TIDAL Connect, Qobuz e Qobuz Connect, Roon
- UPnP/DLNA
- Renderer con supporto OpenHome
- Plugin
- YouTube, Squeezelite, Radio Paradise, Podcast, Pandora, Fusion DSP, SoundCloud, Mixcloud
Specifiche hardware
- USB
- 1 × USB-C device, 2 × USB-A host (5 V / 0,56 A; 5 V / 1,33 A)
- Ingresso S/PDIF coassiale
- 1 × RCA
- Ingresso S/PDIF ottico
- 1 × TOSLINK
- Uscita analogica bilanciata
- 1 × XLR (stereo)
- Uscita analogica sbilanciata
- 1 × RCA (stereo)
- Uscita video
- Mirroring dell'app Volumio OS via HDMI fino a 4K / 60 fps
- LAN
- Gigabit 10/100/1000 Mbps
- Wi-Fi
- Wi-Fi 802.11a/b/g/n/ac, 2,4 GHz e 5 GHz
- Bluetooth
- 5.0
- CPU
- ARM Cortex-A72, Quad Core 1,5 GHz
- RAM
- 2 GB DDR4
- Archiviazione interna
- 16 GB eMMC
- Uscita trigger
- 1 × jack da 3,5 mm (12 V, positivo sulla punta)
- Manopole
- 2 manopole encoder rotative con pulsante
- Display
- Display OLED da 1,3 pollici, luminosità regolabile
- Telecomando
- Telecomando IR Remoto (incluso)
- Alimentazione
- 5 V DC / 3 A
- Ingresso di alimentazione
- Spinotto DC 5,5 × 2,1 mm (positivo al centro)
- Dimensioni
- 27 × 15 × 5,2 cm (10,6 × 5,9 × 2,0 in)
- Peso
- 1,26 kg (2,78 lb)
- Dimensioni imballo
- 31,5 × 19,7 × 11,6 cm (12,4 × 7,8 × 4,6 in)
- Peso con imballo
- 2,04 kg (4,50 lb)

Nella confezione
- Volumio Primo Plus
- Telecomando IR Remoto, batteria inclusa
- Alimentatore 5 V / 3 A
- Scheda informativa con NFC e codice QR
Recensioni dei proprietari
Il parere di chi ha Primo Plus
Scrivi una recensione nello shop
Recensioni di acquirenti verificati su shop.volumio.com, raccolte da REVIEWS.io. Mostrate così come sono state scritte, nella lingua dell'autore.
Les points forts
- Volumio OSà bord : TIDAL, Qobuz, Spotify Connect, AirPlay et Roon Ready, avec toutes les fonctions Premium incluses
- 2×DAC ESS ES9039Q2M, un par canal
- 768kHzPCM en 32-bit, plus DSD512
- 90fshorloge maître de haute précision
- 8+ NOSfiltres du DAC, ou aucun
- 8niveauxde sortie adaptés à votre amplificateur, jusqu’à 6,3 Vrms en symétrique, plus un mode préamplificateur

Conçu et assemblé à Florence, comme chaque appareil Volumio.

Fabriqué à Florence
Assemblé à la main, en Italie
Le Primo Plus est conçu à Florence et y est assemblé à la main, par l’équipe qui développe aussi son logiciel. Chaque exemplaire est contrôlé avant de quitter l’atelier.
En savoir plus sur Volumio à FlorenceVue intérieure
Chaque composant a son rôle
Le Primo Plus a été conçu de zéro autour d’une alimentation plus propre, d’un bruit plus faible et d’une horloge plus précise. Choisissez un composant pour le situer sur la carte.

Son
Accordez-le à votre système
Huit filtres, ou aucun
Choisissez l’un des huit filtres numériques pour affiner le son, ou passez en mode NOS pour désactiver le suréchantillonnage.
Huit niveaux de sortie
Réglez le niveau de sortie selon l’entrée de votre amplificateur. Le contrôle de volume intégré s’y ajoute : le Primo Plus peut ainsi servir de préamplificateur, directement relié à un amplificateur de puissance.
Connectique
Branchez tout
Diffusez via le réseau, ou reliez un ordinateur, un téléviseur, un lecteur CD ou un disque dur. Puis envoyez le signal en symétrique ou en asymétrique.

Entrées
- Réseau
- Gigabit Ethernet ou Wi-Fi double bande
- USB-C
- Depuis un ordinateur, jusqu’à PCM 768 kHz / 32-bit et DSD512
- S/PDIF coaxiale et optique
- RCA et TOSLINK, jusqu’à PCM 192 kHz / 24-bit
- USB-A × 2
- Clés USB, disques durs et lecteurs CD
- Bluetooth
- Bluetooth 5.0
Sorties
- Symétrique
- XLR, de 1,00 à 6,30 Vrms
- Asymétrique
- RCA, de 0,50 à 3,15 Vrms
- USB
- Vers un DAC externe, jusqu’à PCM 1536 kHz / 32-bit et DSD1024, multiroom désactivé
- HDMI
- L’interface Volumio sur votre téléviseur, jusqu’en 4K à 60 fps
- Trigger
- 12 V sur jack 3,5 mm, pour allumer votre amplificateur
L’expérience Volumio
Volumio OS à bord. L’app en main.
Le Primo Plus fonctionne sous Volumio OS, le lecteur de plus de 800 000 appareils. Vous le pilotez depuis l’application Volumio, gratuite sur iPhone et Android.
Volumio OS à bord
Fonctions Premium intégrées
Toute votre musique, un seul lecteur
Le Primo Plus intègre toutes les fonctions Premium : TIDAL et Qobuz avec Connect, Spotify Connect, AirPlay et HighResAudio, plus votre bibliothèque musicale, vos CD et la radio sur Internet.
Elles appartiennent à ce Primo Plus, sans abonnement. Sur un Raspberry Pi ou un PC, les mêmes fonctions sont incluses dans un abonnement Volumio Premium.

Sur votre téléviseur
Branchez un câble HDMI et parcourez votre musique sur grand écran, jusqu’en 4K.

En main
Utilisez la télécommande Remoto fournie, ou les deux boutons rotatifs et l’écran OLED en façade.

Sur votre téléphone
Configurez et pilotez le Primo Plus depuis l’application Volumio.
Primo Plus
Fiche technique
Caractéristiques audio
- DAC
- 2 × ESS Sabre ES9039Q2M
- Filtres du DAC
- 8 filtres numériques pour affiner le son
- Résolution prise en charge
- Jusqu’à PCM 768 kHz / 32 bit et DSD512
- Mode NOS
- Activable ou désactivable
- Horloge maître
- Horloge de haute précision à très faible bruit de phase (90 fs) et très faible gigue
- Mode préamplificateur
- Matériel, volume réglé par le bouton, l’application ou Remoto, pour attaquer directement des amplificateurs de puissance
- Alimentation
- Filtrage LC et double étage linéaire avec régulateurs de ligne dédiés aux circuits analogique et numérique
- Entrée réseau
- Jusqu’à PCM 384 kHz / 32 bit
- Entrée USB-C (périphérique)
- Jusqu’à PCM 768 kHz / 32 bit et DSD512
- Entrée USB-A (hôte)
- Clé USB et HDD/SSD
- Sortie USB
- Jusqu’à PCM 1536 kHz / 32 bit et DSD1024, multiroom désactivé
- Entrée S/PDIF coaxiale
- Jusqu’à PCM 192 kHz / 24 bit
- Entrée S/PDIF optique
- Jusqu’à PCM 192 kHz / 24 bit
- Sortie analogique asymétrique
- 0,50 ; 0,775 ; 1,00 ; 1,50 ; 2,00 ; 2,50 ; 3,00 ; 3,15 (Vrms)
- Sortie analogique symétrique
- 1,00 ; 1,55 ; 2,00 ; 3,00 ; 4,00 ; 5,00 ; 6,00 ; 6,30 (Vrms)
- Impédance de sortie analogique
- ≈140 Ω
- Formats pris en charge
- DSD, WAV, FLAC, ALAC, AAC, Vorbis, MP3 et autres
- Services pris en charge
- AirPlay via Shairport Sync, Spotify Connect, TIDAL et TIDAL Connect, Qobuz et Qobuz Connect, Roon
- UPnP/DLNA
- Renderer compatible OpenHome
- Plugins
- YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, Fusion DSP, SoundCloud, Mixcloud
Caractéristiques matérielles
- USB
- 1 × USB-C périphérique, 2 × USB-A hôte (5 V / 0,56 A ; 5 V / 1,33 A)
- Entrée S/PDIF coaxiale
- 1 × RCA
- Entrée S/PDIF optique
- 1 × TOSLINK
- Sortie analogique symétrique
- 1 × XLR (stéréo)
- Sortie analogique asymétrique
- 1 × RCA (stéréo)
- Sortie vidéo
- Recopie de l’application Volumio OS en HDMI, jusqu’en 4K / 60 fps
- LAN
- Gigabit 10/100/1000 Mbps
- Wi-Fi
- Wi-Fi 802.11a/b/g/n/ac, 2,4 GHz et 5 GHz
- Bluetooth
- 5.0
- CPU
- ARM Cortex-A72, quatre cœurs, 1,5 GHz
- RAM
- 2 Go DDR4
- Stockage interne
- 16 Go eMMC
- Sortie trigger
- 1 × jack 3,5 mm (12 V, positif sur la pointe)
- Boutons rotatifs
- 2 boutons rotatifs à encodeur avec poussoir
- Écran
- Écran OLED 1,3 pouce, luminosité réglable
- Télécommande
- Télécommande IR Remoto (incluse)
- Alimentation
- 5 V DC / 3 A
- Entrée d’alimentation
- Connecteur DC 5,5 × 2,1 mm (positif au centre)
- Dimensions
- 27 × 15 × 5,2 cm (10,6 × 5,9 × 2,0 in)
- Poids
- 1,26 kg (2,78 lb)
- Dimensions du colis
- 31,5 × 19,7 × 11,6 cm (12,4 × 7,8 × 4,6 in)
- Poids du colis
- 2,04 kg (4,50 lb)

Dans la boîte
- Volumio Primo Plus
- Télécommande IR Remoto, pile incluse
- Alimentation 5 V / 3 A
- Carte d’information NFC et QR code
Avis de propriétaires
L’avis des clients du Primo Plus
Rédiger un avis sur la boutique
Avis d’acheteurs vérifiés sur shop.volumio.com, recueillis par REVIEWS.io. Affichés tels quels, dans la langue de leur auteur.
Lo más destacado
- Volumio OSintegrado: TIDAL, Qobuz, Spotify Connect, AirPlay y Roon Ready, con todas las funciones Premium incluidas
- 2×DAC ESS ES9039Q2M, uno por canal
- 768kHzPCM a 32-bit, además de DSD512
- 90fsreloj maestro de alta precisión
- 8+ NOSfiltros del DAC, o ninguno
- 8nivelesde salida para adaptarse a tu amplificador, hasta 6,3 Vrms en balanceado, y un modo preamplificador

Diseñado y ensamblado en Florencia, como todos los dispositivos Volumio.

Hecho en Florencia
Ensamblado a mano, en Italia
Primo Plus se diseña en Florencia y se ensambla allí a mano, a cargo del mismo equipo que escribe su software. Cada unidad se revisa antes de salir del laboratorio.
Más sobre Volumio en FlorenciaPor dentro
Cada componente tiene una función
Primo Plus se diseñó desde cero en torno a una alimentación más limpia, menos ruido y un reloj más preciso. Elige un componente para localizarlo en la placa.

Sonido
Ajústalo a tu equipo
Ocho filtros, o ninguno
Elige uno de los ocho filtros digitales para afinar el sonido, o pasa al modo NOS para desactivar el sobremuestreo.
Ocho niveles de salida
Ajusta el nivel de salida a la entrada de tu amplificador. El control de volumen integrado actúa sobre ese nivel, así que Primo Plus también puede funcionar como preamplificador, conectado directamente a una etapa de potencia.
Conexiones
Conecta de todo
Reproduce por streaming a través de la red, o conecta un ordenador, un televisor, una unidad de CD o un disco duro. Después envía la señal en balanceado o en no balanceado.

Entradas
- Red
- Gigabit Ethernet o Wi-Fi de doble banda
- USB-C
- Desde un ordenador, hasta PCM 768 kHz / 32-bit y DSD512
- S/PDIF coaxial y óptica
- RCA y TOSLINK, hasta PCM 192 kHz / 24-bit
- USB-A × 2
- Memorias USB, discos duros y unidades de CD
- Bluetooth
- Bluetooth 5.0
Salidas
- Balanceada
- XLR, de 1,00 a 6,30 Vrms
- No balanceada
- RCA, de 0,50 a 3,15 Vrms
- USB
- A un DAC externo, hasta PCM 1536 kHz / 32-bit y DSD1024, con el multiroom desactivado
- HDMI
- La interfaz de Volumio en tu televisor, hasta 4K a 60 fps
- Trigger
- 12 V en una toma de 3,5 mm, para encender tu amplificador
La experiencia Volumio
Volumio OS dentro. La app en tu mano.
Primo Plus funciona con Volumio OS, el reproductor que mueve más de 800.000 dispositivos. Se controla desde la app de Volumio, gratuita para iPhone y Android.
Volumio OS integrado
Funciones Premium incluidas
Toda tu música, un solo reproductor
Primo Plus incluye todas las funciones Premium: TIDAL y Qobuz con Connect, Spotify Connect, AirPlay y HighResAudio, además de tu biblioteca musical, tus CD y la radio por internet.
Vienen con este Primo Plus, sin suscripción. En una Raspberry Pi o un PC, las mismas funciones se incluyen en una suscripción a Volumio Premium.

En tu televisor
Conecta el HDMI y explora tu música en la pantalla grande, hasta en 4K.

En tu mano
Usa el mando Remoto incluido en la caja, o los dos mandos giratorios y la pantalla OLED del frontal.

Primo Plus
Especificaciones
Especificaciones de audio
- DAC
- 2 × ESS Sabre ES9039Q2M
- Filtros del DAC
- 8 filtros digitales para el ajuste fino
- Resolución admitida
- Hasta PCM 768 kHz / 32 bit y DSD512
- Modo NOS
- Activable (ON/OFF)
- Reloj maestro
- Reloj de alta precisión con ruido de fase (90 fs) y jitter ultrabajos
- Modo preamplificador
- Por hardware, volumen desde el mando giratorio, la app o Remoto, para conectarse directamente a etapas de potencia
- Fuente de alimentación
- Filtrado LC y etapa lineal doble con reguladores de línea dedicados para las rutas analógica y digital
- Entrada de red
- Hasta PCM 384 kHz / 32 bit
- Entrada USB-C (dispositivo)
- Hasta PCM 768 kHz / 32 bit y DSD512
- Entrada USB-A (host)
- Memoria USB y HDD/SSD
- Salida USB
- Hasta PCM 1536 kHz / 32 bit y DSD1024, con el multiroom desactivado
- Entrada S/PDIF coaxial
- Hasta PCM 192 kHz / 24 bit
- Entrada S/PDIF óptica
- Hasta PCM 192 kHz / 24 bit
- Salida analógica no balanceada
- 0,50; 0,775; 1,00; 1,50; 2,00; 2,50; 3,00; 3,15 (Vrms)
- Salida analógica balanceada
- 1,00; 1,55; 2,00; 3,00; 4,00; 5,00; 6,00; 6,30 (Vrms)
- Impedancia de salida analógica
- ≈140 Ω
- Formatos admitidos
- DSD, WAV, FLAC, ALAC, AAC, Vorbis, MP3 y otros
- Servicios compatibles
- AirPlay mediante Shairport Sync, Spotify Connect, TIDAL y TIDAL Connect, Qobuz y Qobuz Connect, Roon
- UPnP/DLNA
- Renderizador compatible con OpenHome
- Plugins
- YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, Fusion DSP, SoundCloud, Mixcloud
Especificaciones de hardware
- USB
- 1 × USB-C dispositivo, 2 × USB-A host (5 V / 0,56 A; 5 V / 1,33 A)
- Entrada S/PDIF coaxial
- 1 × RCA
- Entrada S/PDIF óptica
- 1 × TOSLINK
- Salida analógica balanceada
- 1 × XLR (estéreo)
- Salida analógica no balanceada
- 1 × RCA (estéreo)
- Salida de vídeo
- Duplicado de la app de Volumio OS por HDMI hasta 4K / 60 fps
- LAN
- Gigabit 10/100/1000 Mbps
- Wi-Fi
- Wi-Fi 802.11a/b/g/n/ac, 2,4 GHz y 5 GHz
- Bluetooth
- 5.0
- CPU
- ARM Cortex-A72, cuatro núcleos a 1,5 GHz
- RAM
- 2 GB DDR4
- Almacenamiento interno
- 16 GB eMMC
- Salida de trigger
- 1 × toma de 3,5 mm (12 V, positivo en la punta)
- Mandos giratorios
- 2 mandos giratorios (encoder) con pulsador
- Pantalla
- Pantalla OLED de 1,3 pulgadas, brillo ajustable
- Mando a distancia
- Mando a distancia IR Remoto (incluido)
- Alimentación
- 5 V DC / 3 A
- Entrada de alimentación
- Conector de barril de 5,5 × 2,1 mm (polaridad positiva)
- Dimensiones
- 27 × 15 × 5,2 cm (10,6 × 5,9 × 2,0 in)
- Peso
- 1,26 kg (2,78 lb)
- Dimensiones del paquete
- 31,5 × 19,7 × 11,6 cm (12,4 × 7,8 × 4,6 in)
- Peso del paquete
- 2,04 kg (4,50 lb)

En la caja
- Volumio Primo Plus
- Mando IR Remoto, pila incluida
- Fuente de alimentación de 5 V / 3 A
- Tarjeta informativa con NFC y código QR
Reseñas de propietarios
Qué opinan de Primo Plus
Escribir una reseña en la tienda
Reseñas de compradores verificados en shop.volumio.com, recopiladas por REVIEWS.io. Se muestran tal como se escribieron, en el idioma de cada autor.
Reviews



Primo V3
Rivo Plus